The GRBL Settings for Rezier are right HERE
To View and Change your Settings In Easel Select Machine > General Settings > Machine Inspector ( OR simply Press Ctrl+Shift+D )
Then scroll to the bottom portion labeled "settings" if any need changed, scroll to the top "console" section and enter them one at a time as needed.
Fox Alien 4040 MASUTER (scroll to the bottom for the 4040XE settings)
$0=10 (Step pulse time)
$1=255 (Step idle delay)
$2=0 (Step pulse invert)
$3=0 (Step direction invert)
$4=0 (Invert step enable pin)
$5=0 (Invert limit pins)
$6=0 (Invert probe pin)
$10=1 (Status report options)
$11=0.010 (Junction deviation)
$12=0.002 (Arc tolerance)
$13=0 (Report in inches)
$20=0 (Soft limits enable)
$21=1 (Hard limits enable)
$22=1 (Homing cycle enable)
$23=3 (Homing direction invert)
$24=25.000 (Homing locate feed rate)
$25=1000.000 (Homing search seek rate)
$26=250 (Homing switch debounce delay)
$27=1.000 (Homing switch pull-off distance)
$30=1000 (Maximum spindle speed) (This should be 10000)
$31=0 (Minimum spindle speed)
$32=0 (Laser-mode enable) (Change to =1 when laser is being used)
$100=80.000 (X-axis travel resolution)
$101=80.000 (Y-axis travel resolution)
$102=400.000 (Z-axis travel resolution)
$110=2000.000 (X-axis maximum rate)
$111=2000.000 (Y-axis maximum rate)
$112=1200.000 (Z-axis maximum rate)
$120=300.000 (X-axis acceleration)
$121=300.000 (Y-axis acceleration)
$122=30.000 (Z-axis acceleration)
$130=400.000 (X-axis maximum travel)
$131=380.000 (Y-axis maximum travel)
$132=55.000 (Z-axis maximum travel)
Check out this Laser Add-On And Offline Controller for your 4040 Masuter
$0=10 (Step pulse time)
$1=255 (Step idle delay)
$2=0 (Step pulse invert)
$3=0 (Step direction invert)
$4=0 (Invert step enable pin)
$5=0 (Invert limit pins)
$6=0 (Invert probe pin)
$10=1 (Status report options)
$11=0.010 (Junction deviation)
$12=0.002 (Arc tolerance)
$13=0 (Report in inches)
$20=0 (Soft limits enable)
$21=1 (Hard limits enable)
$22=1 (Homing cycle enable)
$23=3 (Homing direction invert)
$24=25.000 (Homing locate feed rate)
$25=500.000 (Homing search seek rate)
$26=250 (Homing switch debounce delay)
$27=3.000 (Homing switch pull-off distance)
$30=10000 (Maximum spindle speed)
$31=0 (Minimum spindle speed)
$32=0 (Laser-mode enable) (Change to =1 when laser is being used)
$100=40.000 (X-axis travel resolution)
$101=40.000 (Y-axis travel resolution)
$102=160.000 (Z-axis travel resolution)
$110=2000.000 (X-axis maximum rate)
$111=2000.000 (Y-axis maximum rate)
$112=2000.000 (Z-axis maximum rate)
$120=300.000 (X-axis acceleration)
$121=300.000 (Y-axis acceleration)
$122=300.000 (Z-axis acceleration)
$130=400.000 (X-axis maximum travel)
$131=400.000 (Y-axis maximum travel)
$132=55.000 (Z-axis maximum travel)
My Favorite V-Bits:
Interested In Carving 3D like this?
Try for free with this link: 90 days of Carveco Maker FREE
MASTER 4040 CNC Fox Alien SAINSMART 3018 PRoVERxl 4030CNC Laser
thanks for posting these up! great resource